Assembly Guides

How to assemble slatted or board base frame bed?

Assembling the slatted bed frame should take no longer than 15-20 minutes. Below are the steps to support you to build your new bed. Note: all bolts are pre-attached to the bed frames

  1. Unscrew all bolts attached to the headboard and footboard (8 bolts)
  2. Attach the sides both left and right on the headboard side first (marked A,B. Tighten the bolts slightly just so they stay in place
  3. Attach the sides both left and right on the footboard, marked C,D. Tighten these bolts slightly
  4. Place the support bar(s) marked E. Now tighten all bolts in the 4 corners
  5. Place the wooden slats evenly. These can be screwed in which is recommended but this is optional as these can lifted and customer has access to vacuum underneath. 
  6. IF you have chosen hard board base then these are just to be placed on top and joined together in the middle leave a slight gap at the headboard and footboard 

How to assemble Metal Gas Lift Ottoman Bed

The steps are listed below. We recommend 2 people people to assemble this type of bed

  1. Assemble the bed frame first. Headboard side rails and footboard. (Follow assembly guide above). Nuts are already on the bolts
  2. Open up the metal gas lift frame and the brown box which contacts 2X small bars, 1X U thin bar and 10X bolts. 6X are normal bolts and 4X are allen key bolts. Open p the gas lift frame and place the small black bars on either side of the frame with the allen key bolts. Place the U bar on one of the sides of the gas lift frame where you have placed the small black bars. 

        3.  Fix the gas lift pistons in place - If the cylinders don't align simply twist the                         hydraulic cylinder slowly until it aligns. 

        4. Place the metal frame on top of the frame. Where the U is thats the head side                   and frame only goes on on way. The remaining 6 bolts go on top of the gas lift                 frame. 3 each side. 

        5. Attach the Black bar that goes across using the bolts provided

 

How to assemble Divan Bed

  1. Please remove the fabric straps that are keeping the drawers from sliding out whilst in transit. Cut the fabric strap across the center to release the drawer. Cut the remaining strap to your chosen length so it is not in the way  when using the drawers. 

 

                                       

 2. Click in the chrome gliders in to each base. Give a firm tap and they will lock in                 securely. (As shown below)

 

                                                                             

 

3. After fitting the gliders, turn both the parts of the base on their side and bring them together so that the flats ends meet. (This step does not apply for Single size beds). Where the ends meet fit the U-Clips so that they clamp around the underside timber piercing through the mesh fabric

 

4. Allocate the holes at the back of the base and headboard. (Pierce the materiel) 

5.  Attach the wooden legs with the 4 screws and screw them into the allocated holes.           (Note this for normal size 26" headboard)

6. Screw in the 4 support bolts to the back of the base in the pre drilled holes. Align the headboard like shown

7. Put the mattress on and adjust the the height of the headboard. Push the mattress back and ensure headboard is on top of the mattress like shown then tighten the white bolts

 

How to assemble Ottoman Divan Bed

  1. Click in the chrome gliders in to each base. Give a firm tap and they will lock in  securely. (once clicked in they cannot be removed)
  2. Line up the holes with the headboard cut outs with the holes in the back of the base (Pierce the materiel). 
  3. Screw in the white washer bolts through the back of the headboard cut outs and into the back of the base. 4X bolts in total, 2 for each side

4. Push the 2 U-clips in to secure both the bases together. 

5. Use the long bolts to secure the lids together. (There is a small incision on both the lids to show you where the bolts need to inserted. Please note the lids will not close if the mattress is not placed on top.